WHY CHOOSE BE ATEX
- Re-calibrate of gas detection equipments
- Check and verify of all PPE equipements
- Customised configuration of all devices
Entête
The affordable single-channel din-mounted control panel for the detection of flammable gases.
The Surveyor 4B is equipped with a small box that can be snap-fastened onto a standard symmetrical DIN rail: it is easy to install in an electrical control cabinet.
This control panel – which does not have a display – was designed as a detection solution for small boiler plants and battery charging rooms. The Surveyor 4B is an efficiant way to equip your facility at low cost.
Characteristics
Attribut
Size
Valeur
22.8 x 4.1 x 3.5 in. (5.8 x 10.5 x 9.0 cm)
Attribut
Operating temperature
Valeur
+14°F to +113°F (-10°C to +45°C)
Attribut
Humidity
Valeur
5-95% RH, non consending
Attribut
Power supply
Valeur
5.8 W (detector connected) @230Vac
0.4A (detector connected) @12 Vdc
0.4A (detector connected) @12 Vdc
Attribut
Additional feature
Valeur
External battery (optional)
Attribut
Protection Class
Valeur
IP30
Attribut
Approval
Valeur
EMC Electromagnetic compatibility
Type 1 and 2: EN50270-06, EN 61010-1:10
Type 1 and 2: EN50270-06, EN 61010-1:10
Attribut
Warranty
Valeur
2 years
Features
INPUT SPECIFICATIONS
- Available inputs: one available input, for bridge detectors only (340mA)
- Nominal voltage: (11.5 to 14V) on external power supply
- Current available on the channel: 11A
ALARMS
- Relays: Relay 1: common to gas and fault / Relay 2: gas, RCT relay 1 (fail safe) / RCT relay 2
- Max. interrupting rating: 60VA or 28W (resistive charge)
- Alarms per channel: two alarm levels (Al1, Al2) + Fault
- Programming: manual or automatic alarm acknowledgement
Datasheet
Manual
Accessories
Related products
SURVEYOR 4B Controller (SV4B) - User reviews
Add a review & rate this product
* required fields