WHY CHOOSE BE ATEX
- Re-calibrate of gas detection equipments
- Check and verify of all PPE equipements
- Customised configuration of all devices
The single channel gas detection system for simple applications.
The MX16 is a digital or analog 1 channel unit for simple applications. It is designed to measure a single gas present in the atmosphere such as: O₂, CO₂, CH₄, H₂ and LPG.
Some application examples:
- Anoxia (O₂) detection for laboratory applications
- CO₂ detection during yeast fermentation in breweries or must fermentation in viticulture
- Gas detection in small boiler rooms or battery charging rooms
Small and easy to use, the unit is available in different versions:
VERSION 1 line for 1 analogical detector 4-20mA: O₂ (0-30% Vol.), CO₂ (0-5 % Vol), CH₄ (0-100% LEL), GPL (0-100% LEL), H₂ (0-100% LEL)
EASY DUO VERSION 1 line for 1 digital sensor: OLCT 10N O₂ (0-30% Vol) OLCT 10N CO₂ (0-5 % Vol)
Also compatible with iTrans 2, OLCT 80, Meridian, OLCT 710 or any other analog sensor.
Characteristics
EMC compliant according to EN 50270:15
Features
INPUT CHARACTERISTICS
Lines of measurement :
- digital: 1, RS 485, proprietary protocol, 9600 Baud, Industrial network cable, 2 shielded twisted pairs
- analog: 1 (4-20mA), Input range 0 to 23mA (4-20mA reserved for measurement), Load resistance 120 Ohm, Shielded cable 1 pair or 1 third depending on detector
Current available on the channel: 0.42A (at 50°C) to 1A (at 30°C) with internal AC supply
ALARMS & OUTPUTS
Number of alarms per channel: 4 alarm levels (Al1, Al2, negative drift, overrange) + Fault, Doubtfulness for explosive gases, Al1 and Al2 alarm thresholds accessible and modifiable, manual acknowledgements
Internal relays: 2 alarm relays + 1 fault relay (non-programmable), positive safety, potential-free dry contacts, RCT, 5A/250Vac-30Vdc
Digital output: RS485 Modbus RTU protocol
Datasheet
Manual
Related products
Gas detection unit MX16 - User reviews
Add a review & rate this product
* required fields