OLCT 10N Fixed Gas Detector
WHY CHOOSE BE ATEX
- Re-calibrate of gas detection equipments
- Check and verify of all PPE equipements
- Customised configuration of all devices
The digital detector designed to reduce cabling costs.
The OLCT 10N detector has been specially designed to detect the most commonly found gases in the commercial or light industry sector.
Intended for use via digital connection with the MX 43 control panel, the OLCT 10N provides a fast and accurate response. You can have up to 16 detectors on the same digital line or distribute 32 detectors across the 8 lines of an MX43. All the sensor and relay information is processed by the control panel in under one second.
With an ultra-bright LED and a magnet, calibration of the detector is automatic and does not require the housing to be opened.
The calibration information, including the gas response curve, are logged by the MX 43.
IP65 certified, the OLCT 10N is approved for use in ingress protected.
Catalytic sensors: 0-100 %RH, non-condensing
Catalytic sensor : 50 mA in normal operation @ 24 Vdc
CO2 Infrared sensor: 20mA in normal operation @24Vdc
Up to 8 explosive gas detectors at 225 m with a 0.9 mm² (AWG 18) core size cable
ATEX: Ex nA nC IIC T4 Gc for explosimetric versions / Ex nA IIC T4 Gc for others (except CO2 versions)
IECEx: II 3 GD - IECEx 11.0029X
EMC: Electromagnetic compatibility according to EN50270
- Detection of combustible gases, toxic gases or oxygen
- Digital technology
- Non-intrusive calibration
- Cost savings on wiring installation
OLCT 10N Fixed Gas Detector - User reviews
Add a review & rate this product
* required fields