OLC10 and OLCT10 Fixed Gas Detector

OLC10 and OLCT10 Fixed Gas Detector
OLC10 and OLCT10 Fixed Gas Detector
Certification BE ATEX

WHY CHOOSE BE ATEX

  • Re-calibrate of gas detection equipments
  • Check and verify of all PPE equipements
  • Customised configuration of all devices
Entête

The affordable Oldham OLC(T)10 detector for applications in boiler rooms or parking facilities.

Specially designed for use in boiler rooms and parking facilities, the OLC(T) 10 series is the most cost-effective solution for monitoring explosive gases and vapours, toxic combustible gases (CO, NO, NO₂, etc.), and freons.

The main advantages of these detectors are their small size, ease of installation and ease of operation. Used with the Oldham control panels, these detectors deliver a solution that meets French and European standards and is excellent value for money.

Characteristics

Attribut
Size
Valeur
4.6 x 5.0 x 2.3 in. (11.8 x 12.6 x 5.8 cm)
Attribut
Housing materials
Valeur
ABS
Attribut
Power supply
Valeur
OLC 10 / 10 TWIN: By controller only
OLCT 10: 15 to 30 Vdc (nominal 24 Vdc)
Attribut
Operating temperature
Valeur
+14°F to 113°F (-10 to +45 °C)
Attribut
Humidity
Valeur
0-95% HR, non condensing
Attribut
Consumption
Valeur
OLC 10 / 10 TWIN: 340 mA max.
OLCT 10: 100 mA max.
Attribut
Connection
Valeur
OLC 10 : 3 Wire, shielded, core size 1,5 mm² max. cable lenght 300 m, 1 cable-gland M16 (outer Ø 4-8 mm)
OLC10 TWIN : shielded, core siez 1,5 mm², 3-wire to control unit, 4-wire between both sensors, max. cable lenght 300 m, 2 cable-glands M16 (outer Ø 4-8 mm)
OLCT 10: 3-wire, shielded, core siez 1,5 mm², max. cable lengt 1km if connected, with control unit (32 W max un loop) 1 cable gland M16 (outer Ø 4-8 mm)
Attribut
Protection Class
Valeur
IP65
Attribut
Approval
Valeur
ATEX: OLC10 / 10 TWIN: II 3 G / Ex nA IIC T6, OLCT10: II 3 G / Ex nA IIC T4
EMC: Electromagnetic compatibility according to EN 50270:06 (typ 1)
Attribut
Warranty
Valeur
2 years

Features

  • Catalytic sensors
  • 4-20mA output signal with OLCT 10
  • Dust and humidity resistant
  • Fast and accurate response
  • ATEX Approval for use in hazardous areas (zone 2)
  • OLC 10 TWIN allows connection of 2 sensors with a single channel without any additionnal junction box.

OLC10 and OLCT10 Fixed Gas Detector - User reviews

Add a review & rate this product

* required fields

Restricted HTML

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type> <li> <dl> <dt> <dd> <h2 id> <h3 id> <h4 id> <h5 id> <h6 id>
  • Lines and paragraphs break automatically.
  • Web page addresses and email addresses turn into links automatically.