WHY CHOOSE BE ATEX
- Re-calibrate of gas detection equipments
- Check and verify of all PPE equipements
- Customised configuration of all devices
Entête
The digital and analogue control panel that can support up to eight detectors, to keep installation costs down.
The MX 32 V2 is a digital and analogue control panel designed to measure gases present in the atmosphere and more generally to process any 4-20mA analogue, on-off control, or ModBus RTU-compatible signal.
The MX 32 enables you to combine digital lines and analogue channels, and therefore suits any facility. Up to eight detectors can be connected across its two lines, thus reducing cabling costs.
Modules available:
- Module with 8 analogue inputs
- 16 analog input module
- 4 analog output module
- 4 or 8 relay module
Characteristics
Attribut
Size
Valeur
10.4 x 10.5 x 3.8 in. (26.5 x 26.6 x 9.6 cm)
Attribut
Operating temperature
Valeur
-4°F to +122°F (-20°C to +50°C)
Attribut
Humidity
Valeur
5 to 95% RH
Attribut
Power supply
Valeur
100-240Vac 50-60Hz (35W) or 22-28Vdc (92W)
Attribut
Consumption
Valeur
250mA max. (without module or detector)
Attribut
Connection
Valeur
5 M16 cable glands, 4-8 mm² (8-11 AWG) out. Øcable
2 M20 cable glands, 6-12 mm² (7-9 AWG) out. Øcable
2 M20 cable glands, 6-12 mm² (7-9 AWG) out. Øcable
Attribut
Additional feature
Valeur
External battery (optional)
Attribut
Protection Class
Valeur
IP55
Attribut
Approval
Valeur
EMC According to EN 50270:15
Low voltage directive According to EN 61010-1:10
ATEX Metrological performances according to EN 60079-29-1:2016 and EN 50271:10
Low voltage directive According to EN 61010-1:10
ATEX Metrological performances according to EN 60079-29-1:2016 and EN 50271:10
Attribut
Warranty
Valeur
2 years
Features
INPUT SPECIFICATIONS
- Available lines: Maximum of 2 digital lines (up to 8 detectors), RS-485, proprietary protocol, 9600 baud, Industrial network cable: 2 shielded twisted pairs, Maximum of 2 analogue channels, 0-23mA signal input (4-20mA reserved for measurement), 120 Ohm load resistance, 2 or 3 shielded wires
- Nominal voltage: 21 to 28V DC on external power supply
- Current available on the channel: 1.5A per line with external DC power, 1A in total with internal AC power depending on ambient T°C
- Insulation: 1,500 V between the power supply and the digital network
ALARMS
- Relays: four fully configurable alarm relays and one fault relay (non-configurable) / Dry contacts RCT contact on each relay: 2A/250V AC - 30V DC (resistive charge)
- Alarms per channel: five alarm levels (Al1, Al2, Al3, overscale, underscale) + high-concentration fault for explosive gases
- Programming: for instantaneous or averaged values, by increasing or decreasing values, and manual or automatic rearming
Datasheet
Manual
Accessories
Related products
MX32V2 Controller - User reviews
Add a review & rate this product
* required fields