SENSEPOINT XCD Fixed Gas Detector

Currently no review

WHY CHOOSE BE ATEX

Re-calibrate of gas detection equipments
Check and verify of all PPE equipements
Customised configuration of all devices

The perfect detector for hard-to-reach sites or zones.

The Sensepoint XCD range of detectors provides a comprehensive solution to monitor combustible, toxic and oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors.

The Sensepoint XCD uses a colour system so users can confirm its status at a glance. A tri-colour backlit LCD screen clearly and immediately indicates the unit’s status, even from a distance:

Green LCD screen indicates normal operation
Yellow LCD screen indicates a fault
Red LCD screen indicates an alarm

Users can modify the operation mode of each detector using the LCD screen and magnet switches, without even needing to open the unit.

It adapts to all operational constraints as it allows the cell to be offset 30m from the transmitter.

Characteristics

Size

8.85 x 6.45 x 3.9 in. / 22.5 x 16.4 x 9.9 cm

Weight

Aluminium Alloy LM25: 4.4lbs (2.0kg)
316 Stainless Steel: 11lbs (5.0kg)

Housing materials

Aluminium alloy or Stainless Steel

Operating temperature

40°F to +149°F (-40°C to +65°C)

Humidity

Continuous 20-90%RH (non-condensing)
Intermittent 10-99%RH (non-condensing)

Power supply

16 to 32VDC (24VDC nominal) for ATEX/IECEx/AP Versions
12 to 32VDC (24VDC nominal) for UL/CSA version

Consumption

Electrochemical cells = 3.7W, IR = 3.7W and catalytic = 4.9W. Maximum inrush current = 800mA at 24VDC.

Connection

M20 ou ¾ NPT

Protection Class

IP66

Approval

ATEX II 2 GD Ex d IIC Gb T6 (Ta -40ºC to +65ºC) T5 (Ta -40ºC to +75ºC) Ex tb IIIC T85°C Db IP66 T100ºC (Ta -40ºC to +75º)
IECEx Ex d IIC Gb T6 (Ta -40ºC to +65ºC) T5 (Ta -40ºC to +75ºC) Ex tb IIIC T85°C Db IP66 T100ºC (Ta -40ºC to +75ºC)
ECM: EN50270:2006 EN6100-6-4:2007
Performance: EN60079-29-1:2007 (flammable), EN45544 (Toxic), EN50104 (Oxygen), EN5027

Warranty

Instrument: 2 years, Sensor: 1 year

Features