RG300, RG 500 ROBE GRAP SOLUTIONS

RG300 ROBE GRAP SOLUTIONS
RG 500 ROBE GRAP SOLUTIONS
RG 500 ROBE GRAP SOLUTIONS
Certification BE ATEX

WHY CHOOSE BE ATEX

  • Re-calibrate of gas detection equipments
  • Check and verify of all PPE equipements
  • Customised configuration of all devices
Entête

The removable and non-removable robe grab solutions.

Light, industry-proven, stainless steel automatic or manual fall arresters, rope grabs prevent workers from falling during ascent or descent for both vertical and horizontal applications.

They are particularly useful on sloping roofs where retractable lifelines may react too slowly. In the event of a fall or slip, Honeywell Miller® rope grabs lock onto the rope, arresting the fall immediately.

Honeywell Miller® rope grabs glide up and down vertical lifelines, providing continuous protection in the event of a fall. They have been designed for use with Honeywell Miller polyamide/polyester rope lifelines fixed to an anchor point independent of the operator’s platform.

Characteristics

Attribut
Size
Valeur
RG 300 Rope diameter: 11 mm
RG 500 Rope diameter: 12 mm
Attribut
Weight
Valeur
Maximum user weight: 140kg
Attribut
Other features
Valeur
RG 300 Available lengths: 5, 10, 15, 20, 25, 30, 40 or 50m
RG 500 Available lengths: 5, 10, 15, 20, 25, 30, 40 or 50m with counterweights available or made to measure by linear metre, available with or without extension (length 0.3m or 1m)
Attribut
Approval
Valeur
EN 353-2:2002

Features

RG 300 GRAP ROPE SOLUTION

  • Rope diameter: 11 mm
  • Product with a long service lifetime under normal conditions
  • Ergonomic
  • Edge tested
  • Shock and dust resistant
  • Combines mobility and comfort when travelling along the rope
  • Compliant with standard EN 353-2:2002
  • Maximum user weight: 140kg
  • 5, 10, 15, 20, 25, 30, 40 or 50m in length with counterweights available or in custom lengths (linear metres)

RG 500 GRAP ROPE SOLUTION

  • Rope diameter: 12 mm
  • Glides along the cord (vertically)
  • Can be removed from the rope
  • The harness can be left attached to the rope grab during installation
  • No risk of the product sliding down the rope during installation
  • Permanent locking system for immediate arrest
  • Suitable for rescue applications
  • Can be used as an anchor device (EN 795/B:2012) 18Kn
  • Can be used as a rope adjustment device (EN 12841/A:2006)
  • Available with or without an extender (0.3m or 1m in length)

RG300, RG 500 ROBE GRAP SOLUTIONS - User reviews

Add a review & rate this product

* required fields

Restricted HTML

  • Allowed HTML tags: <a href hreflang> <em> <strong> <cite> <blockquote cite> <code> <ul type> <ol start type> <li> <dl> <dt> <dd> <h2 id> <h3 id> <h4 id> <h5 id> <h6 id>
  • Lines and paragraphs break automatically.
  • Web page addresses and email addresses turn into links automatically.